It has a wide range of ISOLATION TRANSFORMERS which reduce the effects of power Line problems like noise, spikes, surges, transients and neutral, to a minimum.
Power generation in our country, is no doubt good and availability of continuous power is Certainly better, but the stringent requirements of the sophisticated equipment being used today underlines necessity of clean power.
Owing to inductive loads, capacitive loads, SMPS loads, electronic ballasts and with PWM Switching systems, the present AC Power lines are superimposed with dangerous spikes, Surges, transients, sags and RFI noise and harmonics.
As a result failure rates of electronic equipment are on the rise. Without adequate protection, All electronic equipment is at a great RISK.
Usually the failures are not seen right away. Repeated stress from normal electrical transients weaken components and lead to shortening of component life. Line noises like spikes, surges, transients and so on definitely cause stress on semi conductor components. And Machine Systems experience catastrophic program and software failures, extensive damage to PLC’s and storage media, leading to heavy losses of production, data and man-hours.
APPLICATIONS
• CNC Machines
• Bio Medical Equipment
• Printing Machinery
• Large Computer Installations
• Telecommunication Equipment
• Scientific Equipment
TECHNICAL INFORMATION
|
|
MODELS
|
|
INPUT
|
OUTPUT
|
RATINGS AVAILABLE
|
415V AC 3-Ph
|
415 V AC 3-Ph
|
150VA 3-Ph and up to 500 KVA 3-Ph
|
415V AC 3-Ph
|
220 V AC 3-Ph
|
150VA 3-Ph and up to 500 KVA 3-Ph
|
230 V AC 1-Ph
|
230 V AC 3-Ph
|
150VA 1-Ph and up to 50 KVA 1-Ph
|
230 V AC 1-Ph
|
110 V AC 3-Ph
|
150VA 1-Ph and up to 50 KVA 1-Ph
|
|
SPECIFICATIONS
|
|
System Connections
|
Delta / star or Star / Delta
|
Ratios
|
1:1 and 2:1
|
Regulation
|
Better than 3.5 %
|
Power Factor
|
0.75 lag to 0.75 lead
|
Di-electric strength
|
2500 V AC for 120 Sec
|
Insulation resistance
|
More than 1000 Mega Ohms
|
Coupling Capacitance
|
0.1 PF for 100 db
|
Leakage Current
|
Less than 20 micro amps
|
Common Model attenuation
|
100 db
|
Construction Standards
|
As per IS 2026 part 1 &11
|
|
|